Hitachi G1000 - Creating External Volume Groups

WWN PHY_PORT
(snip)
CL5-C FIBRE ELUN AUT D5 N FCAL N 0 322222
50060e800756ce42 -
(snip)
Creating external volume groups
Create external volume groups for the quorum disk to map the disk on the
external storage system to the primary and secondary storage systems.
• Verify that the volumes in the external storage system are formatted.
• Use the raidcom discover lun -port command to verify that the same
E_VOL_ID_C value (volume identifier included in the SCSI Inquiry
command of the external volume) is displayed for the primary and
secondary storage systems.
For details about creating external volume groups, see the Hitachi Universal
Volume Manager User Guide.
Configuration and pair management using CCI
4-19
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide