Hitachi G1000 - Recovering Paths from the Secondary to Primary System (Pair Status: PAIR)

SIM
• Primary system: DD3XYY
• Secondary system: DD0XYY, 2180XX
Recovery procedure
1. Recover the paths from secondary to primary storage systems.
2. Resynchronize the pair.
Related topics
•
Pair condition before failure on page 6-7
Recovering paths from the secondary to primary system (pair status:
PAIR)
The following figure shows the failure area and recovery when the pair
suspends due to path failure from the secondary system to primary system.
Steps for recovery
1. Reconnect the physical path or reconfigure the SAN to recover the path
from the secondary system to the primary system.
6-28
Disaster recovery of global-active device
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide