Hitachi G1000 - Page 105

3. Specify 0 to the quorum disk ID to set the volume (0x8888) in the
secondary storage system (serial number 11111, entered as 311111) as a
quorum disk. Specify the storage system's serial number and model, VSP
G1000.
raidcom modify ldev -ldev_id 0x8888 -quorum_enable 311111 R800 -
quorum_id 0 -IH1
4. Confirm that asynchronous command processing has completed.
raidcom get command_status -IH1
HANDLE SSB1 SSB2 ERR_CNT Serial# Description
00c3 - - 0 322222 -
Check command and output examples
1. Display the information about the volume (LDEV ID: 0x9999).
raidcom get ldev -ldev_id 0x9999 -fx -IH0
Serial# : 311111
LDEV : 9999
SL : 0
CL : 0
VOL_TYPE : OPEN-V-CVS
VOL_Capacity(BLK) : 61440000
NUM_PORT : 0
PORTs :
F_POOLID : NONE
VOL_ATTR : CVS : ELUN : QRD
E_VendorID : HITACHI
E_ProductID : OPEN-V
E_VOLID :
48495441434849203530333032423637414141410000000000000000000000000
0000000
E_VOLID_C : HITACHI 500308235AAAA................
NUM_E_PORT : 1
E_PORTs : CL5-A-0 0 50060e80072b6750
LDEV_NAMING :
STS : NML
OPE_TYPE : NONE
OPE_RATE : 100
MP# : 0
SSID : 0007
QRDID : 0
QRP_Serial# : 322222
QRP_ID : R8
RSGID : 0
2. Display the information about volume (LDEV ID: 0x8888). Confirm that
the following values are correct:
¢
QRDID (quorum disk ID)
¢
QRP_Serial# (serial number of the storage system that forms a GAD
pair)
¢
QRP_ID (model of the storage system that forms a GAD pair)
raidcom get ldev -ldev_id 0x8888 -fx -IH1
Serial# : 322222
LDEV : 8888
SL : 0
CL : 0
Configuration and pair management using CCI
4-25
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide