Hitachi G1000 - Page 110

Procedure
Reserve a host group ID (CL1-C-0) in resource group (HAGroup1).
raidcom add resource -resource_name HAGroup1 -port CL1-C-0 -IH1
Check command and output examples
Display information about the host group that is set to port (CL1-C). Confirm
that the port name, host group ID, and host group name are correct.
raidcom get host_grp -port CL1-C -resource 1 -IH1
PORT GID GROUP_NAME Serial# HMD
HMO_BITs
CL1-C 0 1C-G00 322222 WIN
Note: If you reserve a host group for which no actual volume is defined in
the resource group, specifying the -key host_grp option for the check
command allows you to display the reserved host group. The following
example shows the result of executing the check command.
raidcom get host_grp -port CL1-C -key host_grp -resource 1 -IH1
PORT GID GROUP_NAME Serial# HMD
HMO_BITs
CL1-C 0 1C-G00 322222 WIN
CL1-C 1 HAVol 322222 WIN
4-30
Configuration and pair management using CCI
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide