¢
From the Actions menu, select Set up Global-Active Device
¢
On the Replication tab, General Tasks, select Set up Global-
Active Device
2. From Configure Quorum Disks, click Select Volume.
3. In the Select Volume window, select a Storage system to provide the
quorum disk, and then do one of the following:
¢
From the Available Volumes list, select a volume, click OK, and then
go to step 12.
¢
If no suitable volume is listed, click Create Volumes. Optionally,
select Advanced Options to configure volume options or specify a
quorum disk label.
4. In the Create Volumes window, create a volume to be used as the
quorum disk.
5. From the Volume Type list select a volume type.
6. (Optional) Click Advanced Options to configure volume options or
specify a quorum disk label.
7. Click Show Plan and confirm that the information in the plan summary is
correct. If changes are required, click Back.
8. (Optional) Update the task name and provide a description.
9. (Optional) Expand Schedule to specify the task schedule.
You can schedule the task to run immediately or later. The default setting
is Now.
10. Click Submit.
If the task is scheduled to run immediately, the process begins.
11. (Optional) Check the progress and result of the task on the Tasks &
Alerts tab. Click the task name to view details of the task.
12. From Configure Quorum Disks, for the primary storage, click
Virtualize Volumes.
13. In the Virtualize Volumes dialog box:
a. Verify the external and internal storage systems are correct.
b. Click Edit External Paths to set or change external paths.
c. (Optional) Select External Path Priority Settings to increase or
decrease path priority.
d. Select Internal Volume Configuration and verify that Change
Internal Volume(s) to Quorum Disk(s) is selected by default. The
default ID is recommended, but can be changed to another value if
necessary.
14. Click Show Plan and submit the task.
15. Repeat steps 12 through 14 for the secondary storage system.
Note that for the secondary storage system, the secondary storage
system name will be displayed.
Using Hitachi Command Suite to set up global-active device
5-7
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
To Next Page
Loading...
