Hitachi G1000 - Page 38

Configuration task Operation target CCI HCS
Mapping the
external volume
Primary, secondary
systems
Creating external
volume groups on
page 4-19
Setting the
quorum disk
Primary, secondary
systems
Setting external
volumes as quorum
disks on page 4-24
Setting up the
secondary system
Creating a VSM Secondary system Setting up the
secondary system on
page 4-26
Setting the
reservation
attribute
Secondary system Setting the
reservation attribute
on the S-VOL on
page 4-33
Section on
allocating volumes
in the Hitachi
Command Suite
User Guide
Adding an LU path
to the S-VOL
Secondary system Adding an LU path to
the S-VOL on page
4-40
Updating CCI configuration definition
files
Server Editing CCI
configuration
definition files on
page 4-42
Monitoring and
managing global-
active device pairs
on page 5-10
Creating GAD pair Primary system Creating the GAD
pair on page 4-43
Allocating global-
active device pairs
on page 5-10
Adding alternate path to the S-VOL Server Adding an alternate
path to the S-VOL
on page 4-47
Section on
optimizing HBA
configurations in
the Hitachi
Command Suite
User Guide
1-24
Overview of global-active device
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide