Hitachi PXR-D User Manual

● Creating a User Pattern 5-8
8
7 Press OK .
The data selection screen for a Change message name then opens.
No
Message name
ＡＢＣ９７０１
No
Message name
Change message name
2011.07.07 12:45
Select the message name to be changed.
1
2
16
17
ＢＢＢＢＢＢＢＢＢＢＢＢ
Manual
Status: Stop Com=0
Start
up
Shut
down
Comm
On/Off
Press Cancel .
You are then returned to the "Print data reduction menu" screen.
If the message name you entered is already saved, the "Duplicate message
name" message appears.
＝＝＝＝＝Duplicate Message Name＝＝＝＝＝
 Print data having the same message name has already
been stored.
Close
Press Close to return to the message name input sequence.
¡ You cannot perform an overwrite for registration purposes.
(1) Overview
¡ You can create and save a user pattern drawing.
¡ Up to 128 characters can be saved (for each character size).
¡ 7 different character sizes can be generated: 5×5, 5×8(5×7), 7×10,
9×8(9×7), 12×16, 18×24, and 24×32.
¡ An inter-character space setting between 0 and 8 can be selected. However,
the acceptable setting range varies with the character size.
¡ The relationship between character sizes and acceptable inter-character
space setting ranges is as indicated below.
5.2.1 Saving a user pattern
5.2 Creating a User Pattern
Character
size
5×5
Range
Default
value
5×75×87×10 9×79×812×1618×24 24×32
0 to 3
0 to 1
0 to 7 0 to 4 0 to 6 0 to 8
214468
Maintenance
Auxiliary
function
Show fault
Menu
Operation
management
Environment
setup menu
(2) Operating procedure
¡ Creating " " with the character size set to 5× 5 and inter-character space set to 0
Inter-
character
space
¡ While the inter-character space of character size 7 × 10 can be set up to 3 dots
at the maximum on the print format screen, it is 1 dot at the maximum on the
"Create user pattern" screen.

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English