Hitachi PXR-D User Manual

7-11 ● Ink Replacement
8
Pull out the ink reservoir.
Ink reservoir
Pull out.
9
Uncap the ink reservoir, and drain the ink remaining in the reservoir.
Cap
Ink reservoir
Beaker
Circulation control
2011.07.07 12:45
Proc. status:
Function：Ink replacement
Operating guide
Empty the ink reservoir and
then fill it. Cap it and
return it to the storage posi-
tion. Press [Start/Continue].
Status:Service
Start/
Continue
Abort
Ink drainage
Ink rep.
Ink refill
7
Press the Start/Continue key.
The following operating guidance appears.
If ink is accidentally spilt, wipe
it up promptly with wiping
paper or something similar.
In addition, do not close the
maintenance cover until you
are sure that the wiped portion
has completely dried.
CAUTION

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English