Hitachi PXR-D User Manual

3-5 ● Setting Print Lines
3
2
1
4 Press OK .
You are then returned to the "Print description" screen. For printings
creation purposes, the number of line is set to 4 for columns 1 to 3.
》《
Column 1 Column 2 Column 3
[・・・・・・・・・・] [・・・・・・・・・・][・・・・・・・・・・]
[・・・・・・・・・・] [・・・・・・・・・・][・・・・・・・・・・] 
[・・・・・・・・・・] [・・・・・・・・・・][・・・・・・・・・・] 
[・・・・・・・・・・] [・・・・・・・・・・][・・・・・・・・・・]
2011.07.07 12:45
Manual
Menu
Status: Ready Com=0
Prev.
col.
Next
col.
Select
message
Message name
［  ］
Start
up
Shut
down
Print line
setup
Edit
message
Print
format
Print
spec.
Comm
On/Off
Save
message
Print layout
Print description
2 Selecting a line count setting of 2 for the first column
From the "Print description" screen, press Print line setup .
Menu
Select
message
Print line
setup
Edit
message
Print
format
Print
spec.
Save
message
The "Print line setup" screen then opens.
Press 2 lines .
Print line
setup type
Print line setup
2011.07.07 12:45
Manual
OK
1 line 2 lines 3 lines 4 lines
Individual column setup
Overall column setup
Cancel
Insert
column
Delete
column
Overall column setup : Sets same number of lines for all
columns.
Individual column setup : Sets number of lines for each column,
or deletes column.
Column 1 Column 2 Column 3
[・・・・・・・・・・] [・・・・・・・・・・] [・・・・・・・・・・]
[・・・・・・・・・・] [・・・・・・・・・・] [・・・・・・・・・・]
[・・・・・・・・・・] [・・・・・・・・・・] [・・・・・・・・・・]
Status: Ready Com=0
Prev.
col.
Next
col.
Message name
［  ］
Start
up
Shut
down
Comm
On/Off
Press OK .
The first column is then set to 2 lines.
¡ To change the setting for another column, press Previous column or
Next column and then repeat step 2 .
If the cursor is not
displayed, press
Show cursor .

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English