Hitachi YUTAKI RWM-2R1E - Page 167

ENGLISH

Setting of Schedule timer
Setting of temperature, operation mode (ECO or Comfort) or change of operation state from ON to OFF for a dened period, after
which operation returns to the previous settings. Manual operation of the unit controller has priority over schedule settings.
Copy to circuit 2:
It is possible to copy the schedule timer
to circuit 2.
Reset conguration:
Press OK button to reset scheduled timers.
Timer type: Selection of the timer type
• Disable
• Simple timer
• Schedule
Timer conguration: New
screen appears to congure a
schedule timer. See explanation
below.
Change Mode: Selection of the working mode
(Only for Circuit 1 or Circuit 2). In Water mode
only when circuit is Fix.
• Mode (uses Eco/Comfort congurations)
• Setting temperature.
Pressing the OK button with “Timer Conguration” being selected displays the detailed schedule screen. The active schedule timers
are shown in a weekly calendar.
Up to ve timer events can be dened for each weekday, and these can be used for turning the operation ON or OFF, to change the
setting temperature or the working mode (Eco/Comfort). Pressing the OK key with one of the weekdays being selected in the weekly
calendar screen displays the detailed schedule for the weekday.
Timer conguration as Setting temperature Timer conguration as Mode
Pressing the “Menu” button during the edition of the timer events for a given weekday displays a menu to copy the daily pattern to
other weekdays or to suppress the selected timer event.
UNIT CONTROLLER (PC-ARFH1E)
PMML0575 rev.2 - 03/2022
153