10.6.4 Commissioning
Under the commissioning menu it is possible to adjust the several parameters:
Screed Drying:
• Circuit 1 setting temperature
• Circuit 2 setting temperature
• Start screed drying
10.6.5 About
In this section of the LCD controller it is possible to nd the following information:
System information:
• Type
• Modules type
• System capacity
• Controller rmware
• Indoor PCB rmware
• Language package
Contact information:
It is possible and
recommendable to ll this
information providing a contact
phone to the user.
YUTAKI CASCADE CONTROLLER ATW-YCC-(01-02)
PMML0575 rev.2 - 03/2022
264