11.13 MENU
11.13.1 Operation information
In operation information menu it is possible to nd the most important setting parameters of the system besides the information of
the operation conditions.
Detailed information about:
• Operation status
• Water setting temperature
• Outdoor ambient temperature
• Outdoor ambient 2 temperature
• Outdoor ambient average temperature
• Second ambient average temperature
• 24h average temperature
Detailed information about Circuit 1-2:
• Operation (Demand ON/OFF)
• Mode (Eco/Comfort)
• Room temperature
• Room setting temperature
• Fan setting speed
• Fan real speed
• Fan stopped by D-OFF
• Current water temperature
• Water setting temperature
• Water OTC setting temperature
• Mixing valve position (only for circuit 2)
1 / 3
Detailed information modules:
• Operation status
• Water inlet temperature
• Water outlet temperature
• Individual DHW (Enable or disable)
• Type (Main or Sub)
Detailed information about DHW:
• Operation
• Current temperature (Only for YUTAKI S)
• Top Sensor (Only for YUTAKI S COMBI)
• Bottom sensor (Only for YUTAKI S COMBI)
• Setting Temperature
• Electrical Heater Status
• Electrical Heater Operation
• Legionella Status
• Legionella Operation
Detailed information about
Swimming pool:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
2 / 3
Detailed information about
Electrical Heater:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
• Load Factor
• Step
Detailed information about Boiler
combination:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
YUTAKI CASCADE CONTROLLER ATW-YCC-03
PMML0575 rev.2 - 03/2022
282
To Next Page
Loading...