Hitachi YUTAKI RWM-2R1E - Menu; Operation Information

10.6 MENU
10.6.1 Operation information
In operation information menu it is possible to nd the most important setting parameters of the system besides the information of
the operation conditions.
Detailed information about DHW:
• Operation
• Current temperature
• Setting Temperature
• Electrical Heater Status
• Electrical Heater Operation
• Legionella Status
• Legionella Operation
Detailed information about:
• Operation status
• Water setting temperature
• Outdoor ambient temperature
• Outdoor ambient 2 temperature
• Outdoor ambient average temperature
• Second ambient average temperature
• 24h average temperature
Detailed information modules:
• Operation status
• Water inlet temperature
• Water outlet temperature
• Individual DHW (Enable or disable)
• Type (Master or Slave)
Detailed information about Circuit 1-2:
• Operation (Demand ON/OFF)
• Mode (Eco/Confort)
• Room temperature
• Room setting temperature
• Current water temperature
• Water setting temperature
• Water OTC setting temperature
• Mixing valve position (only for circuit 2)
1 / 2
Detailed information about Electrical Heater:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
• Load Factor
• Step
Detailed information about Swimming pool:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
Detailed information about Boiler combination:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
Detailed information about Solar
combination:
• Operation (Demand ON/OFF)
• Solar Panel temperature
Shows a list of the alarm history of the
system
2 / 2
YUTAKI CASCADE CONTROLLER ATW-YCC-(01-02)
PMML0575 rev.2 - 03/2022
246