Hitachi YUTAKI RWM-2R1E - Factory Reset; Installer Access

11.13.8 Factory reset
This function is only visible for the installer. It asks for removing all the settings and returns to the factory setting conguration.
11.13.9 Installer access
Menu to enable the access to congure the system.
The login password for the Installer is:
Right , Down , Left , Right
Press “OK” to conrm the password.
If the correct access code is entered, the installer mode icon appears on the notications bar (bottom line).
After 30 minutes of inactivity, it is necessary to repeat the log in process. To exit the Installer mode and return to the unit menu, go to
the “Return to user mode” on the main menu.
YUTAKI CASCADE CONTROLLER ATW-YCC-03
PMML0575 rev.2 - 03/2022
312