ENGLISH
11.13.6 Commissioning
Under the commissioning menu it is possible to adjust the several parameters:
Screed Drying:
• Circuit 1 setting temperature
• Circuit 2 setting temperature
• Start screed drying
11.13.7 About
In this section of the LCD controller it is possible to nd the following information:
System information:
• Type
• Modules type
• System capacity
• Serial number
• Controller rmware
• Indoor PCB rmware
• Language package
• Refrigerant
Contact information:
It is possible and recommendable to
ll this information providing a contact
phone to the user.
YUTAKI CASCADE CONTROLLER ATW-YCC-03
PMML0575 rev.2 - 03/2022
311