Hitachi YUTAKI RWM-2R1E - System Configuration

11.13.3 System conguration
In system conguration menu it is possible to congure all the system settings.
Space Heating / Cooling conguration:
• Water calculation mode
• Eco offset water setting
• Working limits
• Mixing valve (for circuit2)
DHW conguration:
• Status
• Mode
• Setting temperature
• HP control
• HP control setting
• Maximum setting temperature
• Differential temperature
• HP OFF differential temperature
• HP ON differential temperature
• Maximum time
• Cycle Time
• Space Priority status
• Space Priority temperature
• DHW Heater
• Smart conguration
• Anti Legionella
Room thermostats conguration:
(Screen visible only for room thermostats)
• Setting temperature range (air)
• Air Eco Offset
• Thermostat conguration
• Compensation factors
• Room temperature demand OFF
1 / 3
Swimming Pool conguration:
• Status
• Setting temperature
• Offset temperature
Optional functions conguration:
• Hydraulic separator
• Energy conguration
• Smart function
• Heating auto on/off
• Auto heat/cool
• Hot water tank
• Emergency operation
I/O and Sensor conguration:
• Inputs
• Standard outputs
• Optional outputs
• Auxiliary sensors
Complementary Heating conguration:
• Heating Source (HP Only, HP+Boiler,
HP+Heater, HP+Heater+Boiler)
• Electrical heater
• Boiler combination
• Solar combination
Fan coils conguration:
• Controlled fan zones
• Delay on time
• Demand OFF actions
Holiday mode:
• Year
• Month
• Day
• Returning time
• Affected zones
• Start/stop holiday mode
Heat pump conguration:
• Water Pump Conguration
• Night Shift
• Outdoor Average Timer
• Minimum ON Time
• Minimum OFF Time
• Seizure Protection
2 / 3
3 / 3
Cascade conguration:
• Supply setting offset
• Modules conguration
YUTAKI CASCADE CONTROLLER ATW-YCC-03
PMML0575 rev.2 - 03/2022
290