Hitachi YUTAKI RWM-2R1E - Page 218

9.13.3.1 Setting of timer for Room Thermostats
Setting of temperature or change of operation state from ON to OFF for a dened period, after which operation returns to the
previous settings. Manual operation of the unit controller has priority over schedule settings.
Copy to circuit 2:
It is possible to copy the schedule
timer to circuit 2.
Reset conguration:
Press OK button to reset scheduled timers.
Timer status:
• Disable
• Enable
Timer conguration:
New screen appears to
congure a schedule timer. See
explanation below.
Pressing the OK button with “Timer Conguration” being selected displays the detailed schedule screen. The active schedule timers
are shown in a weekly calendar.
Up to six timer events can be dened for each weekday, and these can be used for turning the operation ON or OFF or to change
the setting temperature. Pressing the OK key with one of the weekdays being selected in the weekly calendar screen displays the
detailed schedule for the weekday.
Pressing the “Gear” button during the edition of the timer events for a given weekday displays a menu to copy the daily pattern to
other weekdays or to suppress the selected timer event.
UNIT CONTROLLER (PC-ARFH2E)
PMML0575 rev.2 - 03/2022
204