Setting of Schedule timer
Setting of temperature, operation mode (ECO or Comfort) or change of operation state from ON to OFF for a dened period, after
which operation returns to the previous settings. Manual operation of the unit controller has priority over schedule settings.
Copy to circuit 2:
It is possible to copy the schedule timer
to circuit 2.
Reset conguration:
Press OK button to reset scheduled timers.
Timer type:
Selection of the timer type
• Disable
• Simple timer
• Schedule
Timer conguration:
New screen appears to congure
a schedule timer. See explanation
below.
Change Mode: Selection of the working mode
(Only for Circuit 1 or Circuit 2).In Water mode only
when circuit is Fix.
• Mode (uses Eco/Comfort congurations)
• Setting temperature.
Pressing the OK button with “Timer Conguration” being selected displays the detailed schedule screen. The active schedule timers
are shown in a weekly calendar.
Up to ve timer events can be dened for each weekday, and these can be used for turning the operation ON or OFF, to change the
setting temperature or the working mode (Eco/Comfort). Pressing the OK key with one of the weekdays being selected in the weekly
calendar screen displays the detailed schedule for the weekday.
Timer conguration as Setting temperature Timer conguration as Mode
Pressing the “Menu” button during the edition of the timer events for a given weekday displays a menu to copy the daily pattern to
other weekdays or to suppress the selected timer event.
YUTAKI CASCADE CONTROLLER ATW-YCC-(01-02)
PMML0575 rev.2 - 03/2022
250
To Next Page
Loading...
Need help?
General
