ENGLISH
Installer mode
Icon means that this menu is available only for installer, a special user with higher access privileges to congure the system. In
order to access the controller as Installer, go to “Installer access” menu.
After that, the “Enter password” message is displayed.
The login password for the Installer is:
Right , Down , Left , Right
Press “OK” to conrm the password.
If the correct access code is entered, the installer mode icon appears on the notications bar (bottom line).
Installer mode icon
After 30 minutes of inactivity, it is necessary to repeat the log in process. To exit the Installer mode and return to the unit menu, go to
the “Return to user mode” on the main menu.
? NOTE
The following chapters explain the special settings the Installer can edit. It is important to understand that the Installer can also perform all the actions
available for the typical user.
YUTAKI CASCADE CONTROLLER ATW-YCC-03
PMML0575 rev.2 - 03/2022
271
To Next Page
Loading...
Need help?
General
