Hitachi YUTAKI Series - Removing the Coils for the Reversing and Solenoid Valves

247
RHUE-(3~6)A(V)HN
SMGB0066 rev.0 - 12/2009
Servicing
Service Manual
9
 

Remove the service cover according to the section 1.
“Removing service cover” in this chapter.
Remove the reversing and solenoids valve coils by 2.
removingthescrewxingthecoil.

warning
Electrical hazard. Risk of electrical shock. Do not touch the -
electrical components when the LED201 (Red) located on
the inverter module is ON in order to avoid electrical shock.
Remove the connector on the control PCB of the 3.
electrical box.

note
Remove the connectors on the control PCB of the electrical -
box.
Reversing valve coil
Valve coils