Hitachi YUTAKI Series - LED Indication

53
LED indication
SMGB0066 rev.0 - 12/2009
Electrical wiring
Service Manual
3
 
Keep the same status as before. Setting before shipment:

1

 Thefunctionselectionusingthejumperleadsettingisshowninthetablebelow.
  
0 Enable
Ifthisfunctionis'Enable',incaseofpowerfailuretheunitwillrestart
automatically once the power is recovered
1 Disable

 
   
Power supply ON ON OFF OFF
Power supply OFF OFF OFF OFF
Not available for Yutaki
 
 
Unit stopped OFF
Unit running ON
Alarm OFF
 
 
Normal OFF
Alarm ON
 
 
Setting mode disable OFF
Setting mode enable
(DSW1#3: ON)
ON