Hitachi YUTAKI Series - General Data; 3.1 Capacity Tables

Unit installation
Service Manual
26
RHUE-(3~6)A(V)HN
SMGB0066 rev.0 - 12/2009
 Attaching example of snow protection hood
Left suction hood
Fixing screw
Fixing screw
Fixing screw
Fixing screw
Fixing screw
(Accessories)
(Accessories)
(Accessories)
(Accessories)
(Accessories)
Front side
Rear side
Rear suction hood
Rear suction hood
Lower side
Upper side
Wire rope
(Optional. For
overturning
protection)
Left side
Air discharge hood
Air discharge hood
Air discharge grille
Air discharge grille
Specicationsofsnowprotectionhood
   
Model ASG-NP335F ASG-NP335FS ASG-NP335B ASG-NP335BS ASG-NP335L
ASG-
NP335LS
Quantity 2 per unit 1 per unit
Material
Bonderized
steel sheet
Iron
Stainless
(SUS304)
Bonderized
steel sheet
Iron
Stainless
(SUS304)
Bonderized
steel sheet
Iron
Stainless
(SUS304)
Color
Gray
(1.0Y8.5/0.5 or
approximation)
-
Gray
(1.0Y8.5/0.5 or
approximation)
Gray
(1.0Y8.5/0.5 or
approximation)
-
Weight 3 kg 14 kg 8 kg
Assembling Knockingdownparts(assembledateld)
Components Hood For air discherge part x 1
For rear side air intake x 1
(Uppersidex1,lowesidex1)
For left side air intake x 1
Fixing
screw
8 (M5x12 tapping screw) 10 (M5x14 tapping screw) 8 (M5x12 tapping screw)
Fixing
screw
(SUS)
6 (M5x12
tapping screw)
6 (M5x14)
24 (M5x12
tapping screw)
24 (M5x14)
14 (M5x12
tapping screw)
14 (M5x14)
Installation manual
Installation restriction
Installationwith“Guardnet”,
“Windguard”or“Airowguide”is
not available
Installation with “Guard net” is not available
Safety wire rope for overturning
prevention (optional parts)
ASG-SW20A