Hitron CGNV - Figure 8: LAN Settings Screen; Table 6: LAN Settings Screen

SETUP WIZARD
Version 4.2.7.2, 05/2014. Copyright 2012 Hitron Technologies
29
Version 4.2.7.2, 05/2014. Copyright 2014 Hitron Technologies
29
Hitron CGNV User’s Guide
Click Next in the Setup Wizard: Setting Password screen. The following screen
displays.
Figure 8: LAN Settings Screen
The following table describes the labels in this screen.
Table 6: LAN Settings Screen
Private LAN IP Address Use this field to define the IP address of the CGNV on
the LAN.
Subnet Mask Use this field to define the LAN subnet. Use dotted
decimal notation (for example, 255.255.255.0).
DHCP Status Use this field to configure whether or not the CGNV’s
DHCP server is active.
To turn the DHCP server on, click Enabled.
To turn the DHCP server off, click Disabled.
DHCP Start IP Use this field to specify the IP address at which the
CGNV begins assigning IP addresses to devices on the
LAN (when DHCP is enabled).