Hitron CGNV - The Device Reset Screen

ADMIN
Version 4.2.7.2, 05/2014. Copyright 2012 Hitron Technologies
89
Version 4.2.7.2, 05/2014. Copyright 2014 Hitron Technologies
89
Hitron CGNV User’s Guide
6.7 The Device Reset Screen
Use this screen to back up your CGNV’s settings to your computer, to load settings
from a backup you created earlier, to reboot your CGNV, or to return it to its factory
default settings.
Click Admin > Device Reset. The following screen displays.
SNTP Function Use this field to select whether the SNTP Function be
active or not.
Select Enabled to activate the SNTP Function.
Select Disabled to deactivate the SNTP Function.
NOTE: The Simple Network Time Protocol (SNTP) is an
adaptation of the Network Time Protocol (NTP)
used to synchronize computer clocks in the
Internet.
Time Zone Use this fields to select the time zome when the SNTP
Function enabled.
Assign SNTP Server Enter the SNTP Server you want to assign manually.
Daylight Function Use this field to select whether the Daylight Function be
active or not.
Select Enabled to activate the Daylight Function.
Select Disabled to deactivate the Daylight Function.
Daylight Time Enter the duration of the daylight time.
Save Changes Click this to save your changes to the fields in this screen.
Cancel Click this
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this screen.
Table 32: The Admin: Time Setting Screen (continued)