Hitron CGNV - The WPS & Security Screen

WIRELESS
Version 4.2.7.2, 05/2014. Copyright 2012 Hitron Technologies
74
Version 4.2.7.2, 05/2014. Copyright 2014 Hitron Technologies
74
Hitron CGNV User’s Guide
5.3 The WPS & Security Screen
Use this screen to configure authentication and encryption, and manage Wifi
Protected Setup (WPS).
NOTE: It is strongly recommended that you set up security on your network;
otherwise, anyone in the radio coverage area can access your network.
Click Wireless > WPS & Security Settings. The following screen displays.
Enable Use this field to enable or disable the SSID.
Select ON to enable the SSID.
Deselect OFF to disable the SSID.
Broadcast SSID Use this field to make this SSID visible or invisible to
other wireless devices.
Select ON if you want your network name (SSID) to
be public. Anyone with a wireless device in the
coverage area can discover the SSID, and attempt
to connect to the network.
Select OFF if you do not want the CGNV to
broadcast the network name (SSID) to all wireless
devices in the coverage area. Anyone who wants
to connect to the network must know the SSID.
WMM (QoS) Use this field to apply Wifi MultiMedia (WMM) Quality of
Service (QoS) settings to this SSID.
Select ON to enable WMM QoS on this SSID.
Select OFF to disable WMM QoS on this SSID.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 24: The Wireless: Basic Settings Screen