Hitron CGNV - The Diagnostics Screen

ADMIN
Version 4.2.7.2, 05/2014. Copyright 2012 Hitron Technologies
85
Version 4.2.7.2, 05/2014. Copyright 2014 Hitron Technologies
85
Hitron CGNV User’s Guide
6.4 The Diagnostics Screen
Use this screen to perform ping and traceroute tests on IP addresses or URLs.
Click Admin > Diagnostics. The following screen displays.
Remote Range Allow
All
Use this field to turn remote range on or off.
Select Enabled to turn remote range on.
Select Disabled to turn remote range off.
IP Start Use these fields to specify the start and end IP address
of the remote range.
Enter the start
IP address in the first field, and the end IP
address
in the second field.
IP End
Action Click Add to add the remote range to the fields in this
screen.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 29: The Admin: Remote Management Screen (continued)