Hitron CGNV - Adding or Editing a Managed Device

WIRELESS
Version 4.2.7.2, 05/2014. Copyright 2012 Hitron Technologies
79
Version 4.2.7.2, 05/2014. Copyright 2014 Hitron Technologies
79
Hitron CGNV User’s Guide
5.4.1 Adding or Editing a Managed Device
To add a new managed device, click Add Managed Device in the Wireless >
Access Control screen.
To edit an existing managed device, locate the device in the Wireless > Access
Control screen and click its Manage button.
The following screen displays.
Action Click Manage to make changes to the device’s filtering
status; see Adding or Editing a Managed Device on
page 79 for information on the screen that displays.
Managed Devices
Block Rules Use these buttons to control the action to be taken for
the devices listed:
Select Allow All to ignore the Devices list and let
all devices connect wirelessly to the CGNV.
Select Allow to permit only devices you added to
the Devices list to access the CGNV and the
network wirelessly. All other devices are denied
access.
Select Deny to permit all devices except those you
added to the Devices list to access the CGNV and
the network wirelessly. The specified devices are
denied access.
Host Name This field displays the name of the wireless device.
MAC Address This field displays the device’s MAC (Media Access
Control) address.
Action Click Manage to make changes to the device’s filtering
status; see Adding or Editing a Managed Device on
page 79 for information on the screen that displays.
Save Changes Click this to save your changes to the fields in this
screen.
Add Managed Device Click this to add a new service filtering rule (see Adding or
Editing a Managed Device on page 79
).
Help Click this to see information about the fields in this
screen.
Table 26: The Wireless: Access Control Screen (continued)