Hitron CGNV - Page 96

SECURITY
Version 4.2.7.2, 05/2014. Copyright 2012 Hitron Technologies
96
Version 4.2.7.2, 05/2014. Copyright 2014 Hitron Technologies
96
Hitron CGNV User’s Guide
Protocol This field displays the protocol or protocols to which this
filtering rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Port Range This displays the start and end port for which this
filtering rule applies.
Managed Weekdays This displays the days of the week on which this rule
applies.
Managed Time This displays the start (From) and end (To) of the time
period during which this rule applies, on the specified
Managed Weekdays.
Action Click Manage to make changes to a filtering rule (see
Adding or Editing a Service Filter Rule on page 97).
Add Managed Service Click this to add a new service filtering rule (see Adding
or Editing a Service Filter Rule on page 97).
Save Changes Click this to save your changes to the fields in this
screen.
Help Click this to see information about the fields in this
screen.
Trust PC List
App Name This displays the name of the trust device connected.
IP Address This displays the IP address of the trust network device
connected.
Status This displays whether or not the service filter rule is
enabled
to the trust device connected.
Manage Click Manage to make changes to the trust device’s
service filter status; see Adding or Editing a Trust PC
List on page 99.
Action Click Delete to remove the existing trust device from the
list.
Add Trust Device Click this to add a new Trust Device. (see Adding or
Editing a Trust PC List on page 99).
Save Changes Click this to save your changes to the fields in this
screen.
Help Click this to see information about the fields in this
screen.
Table 35: The Security: Service Filter Screen (continued)