HME EOS HD - Customer Greeter Message Settings

EOS
|
HD OPERATION
20
1. To set the time and locations for Customer Greeter
messages, or to name and record Customer Greeter
messages, press the Menu button on the LANE
STATUS display.

2. On the MAIN MENU, press the Message Center
button.

3. On the MESSAGE CENTER MENU, press the
Customer Greeter button.

4. On the CUSTOMER GREETER display, press the
▲(up) or ▼(down) button to highlight the desired
message. Press the Edit button to access editing
options.



5. Edit the name (optional) of the selected message by
pressing the Rename button on the EDIT CUSTOMER
GREETER display.
On the Rename display, use the Erase button to
clear characters in the current name. Use the ◄,
►, ▲ and ▼ buttons to move the highlight to a
character. Use the Sel (select) button to insert each
highlighted character in the name eld.
When you are nished, press the Back button to save
the new name.







Customer Greeter Message Settings
1 2 3 4 5 6 7 8 9
Introduction
EOS|HD
Equipment
EOS|HD
Operation
Audio Processing
Functions
Equipment Care
and Cleaning
Troubleshooting
Equipment
Specications
EOS|HD Message
Center Guide
Important
Notices