HME EOS HD - Dual-Lane Message Center Settings; Dual-Lane Customer Greeter and Reminder Settings

EOS
|
HD OPERATION
37
Dual-Lane Message Center Settings
Customer Greeter Messages
You can access Message Center Settings by pressing the Menu button on the LANE STATUS display,
and then pressing the Message Center button. Single lane settings can be found under Customer
Greeter Settings, pg. 20.
In dual-lane operations, Customer Greeter messages can
be set to play in Lane 1, Lane 2 or both.
Press the Edit button on the CUSTOMER GREETER
display, and then press the Event button to highlight
Lane 1, Lane 2 or Lane 1/2.


Reminder Messages
In dual-lane operations, Reminder messages can be set
to play through the ceiling speaker and Line Out for
Lane 1, Lane 2 or both.
Press the Settings button on the EDIT REMINDER
MESSAGE display.
On the EDIT REMINDER SETTINGS display, press the
Hear in ceiling speaker or Hear in Line Out buttons to
highlight Lane 1, Lane 2 or Lane 1/2.



1 2 3 4 5 6 7 8 9
Introduction
EOS|HD
Equipment
EOS|HD
Operation
Audio Processing
Functions
Equipment Care
and Cleaning
Troubleshooting
Equipment
Specications
EOS|HD Message
Center Guide
Important
Notices