HME EOS HD - Page 31

EOS
|
HD OPERATION
25
6. To turn the selected message on or off, press the
Message button on the EDIT REMINDER MESSAGE
display to highlight either ✔ (on) or − (off).
Press the Back button to save this setting.

1. To review the existing selected message, or to record
a new message, press the Review/Record button on
the EDIT REMINDER MESSAGE display.
Note: Reviewed messages are played to a specic
headset to avoid interfering with lane operations.

2. To listen to the existing message, press the Review
button on the REVIEW/RECORD MESSAGE display.
Follow instructions listed under READY TO REVIEW.
Press and hold the headset B button to play the
message.


3. To record a new message, press the Record button on
the REVIEW/RECORD MESSAGE display.

4. Follow the instructions under READY TO RECORD
on the display. You can record a message up to 10
seconds long while you are pressing and holding the
headset B button. The Progress indicator will show
you how much time you have left.
When you nish recording, release the headset B
button and press the Review button on the display,
and follow the instructions under READY TO REVIEW
to conrm a successful recording.


Review or Record Message
1 2 3 4 5 6 7 8 9
Introduction
EOS|HD
Equipment
EOS|HD
Operation
Audio Processing
Functions
Equipment Care
and Cleaning
Troubleshooting
Equipment
Specications
EOS|HD Message
Center Guide
Important
Notices