HME EOS HD - Page 32

EOS
|
HD OPERATION
26
Reminder messages can be assigned a high or low
priority. To set message priority, press the Priority
button on the EDIT REMINDER MESSAGE display to
highlight either High or Low. Press the Back button to
save the setting.
Note: If the priority is set Low, the message may play to
completion or be terminated by either an A or B button
being pressed on any headset, or by a car arrival on a
given lane.
If the priority is set High, the message will play to
completion. If a high priority message is interrupted
by an A or B button being pressed on any headset
for a given lane, it will retry until it is able to play to
completion.

1. To choose the schedule for the selected message,
press the Schedule button on the EDIT REMINDER
MESSAGE display.

2. On the SELECT SCHEDULE TIMES display, select the
time period(s) when you want the selected message to
play by pressing the ▲(up) and ▼(down) buttons to
scroll through the 12 available time periods. When
the desired time period is highlighted, press the Edit
button.
Note: Reminder messages are triggered to play at the
beginning of their selected schedule time period(s).
On the EDIT display, press the Scheduled button to
turn the message ✔ (on) or − (off) for the selected time
period.
If you want the message to be on or off during this
time period every day, press the Apply to all days?
button to select Yes or No. If No is selected, only the
selected day will be affected by this change.
Press the Back button to save this setting.





Message Schedule
Message Priority
1 2 3 4 5 6 7 8 9
Introduction
EOS|HD
Equipment
EOS|HD
Operation
Audio Processing
Functions
Equipment Care
and Cleaning
Troubleshooting
Equipment
Specications
EOS|HD Message
Center Guide
Important
Notices