HME EOS HD - Page 38

EOS
|
HD OPERATION
32
4. On the EDIT display, press the Scheduled button to
turn the message ✔ (on) or − (off) for the selected time
period.
If you want the message to be on or off during this
time period every day, press the Apply to all days?
button to select Yes.
If No is selected, only the selected day will be affected
by this change.


Note: To edit the Start and Stop times for the time periods listed on the SELECT
SCHEDULE TIMES display, go to the MESSAGE CENTER MENU and select Edit schedule
times.
1. To choose where the selected Alert message will be
heard, press the Settings button on the EDIT ALERT
MESSAGE display.
Then, press the Headsets button on the EDIT ALERT
SETTINGS display.


2. On the SELECT ALERT HEADSETS display, use the
▲(up) or ▼(down) buttons to select a headset number
for which you would like to turn the selected Alert
message on or off, and then press the Edit button.



3. To select/deselect the headset where the message will
be heard, press the Select headset button on the
EDIT display to highlight ✔ (on) or − (off).
To select/ deselect all headsets, press the Apply to all
headsets? button to highlight Yes or No.
Press the Back button to save this setting.


Message Playback Settings
1 2 3 4 5 6 7 8 9
Introduction
EOS|HD
Equipment
EOS|HD
Operation
Audio Processing
Functions
Equipment Care
and Cleaning
Troubleshooting
Equipment
Specications
EOS|HD Message
Center Guide
Important
Notices