FALCON USER GUIDE
EN2Z-0962GE51 R0715 242
2. On the right pane, click the Event Enrollments tab.
3. To enable event enrollment alarming for the plant, click the PlantStatus link.
RESULT: After selecting PlantStatus event enrollment, the Event
Enrollment Details dialog box displays. The Alarming tab is
selected by default. Here the following algorithmic reporting
settings defined in CARE are displayed:
• Notification Class
• Notify Type
• Event State
• Transitions (Acknowledged status and time and date of last
transition)
• Event Type
• BACnet Property State
• Program State(s) (=Off-Normal-States)
You only can select the transitions to be reported and set the
delay time.
To Next Page
Loading...
