USER GUIDE FALCON
243 EN2Z-0962GE51 R0715
4. Under Transitions, check the transition events that should trigger the event
enrollment alarming. Refer to the relevant To-Off-Normal transitions listed under
Program State(s).
Example: When selecting ´To-Off-Normal`, each transition from
´RUNNING` (Normal State) to any of the Off-Normal States, for
example ´HALTED`, will cause an event enrollment alarm.
5. In the Time Delay field, enter a time delay in sec. The event enrollment alarm
will be sent after the time entered here, has been elapsed.
6. Click SUBMIT button.
7. To view general event enrollment properties, click the General tab. Here the
following properties set in CARE are shown:
• Object Type
• Description
• Read Access Level
• Write Access Level
To Next Page
Loading...
