Honeywell FS24X Plus User Manual

Declaration of Conformity
Declarations of conformity (such as EU or UK Declarations of Conformity) and Product Information
are available at: https://sps.honeywell.com/us/en.
Maintenance
After the FS24XPlus™ Flame detector is installed and commissioned, the detector’s window must be
kept clean. To ensure the detector is operating properly at all times, it may be necessary to establish
a periodic cleaning schedule. Inspect at least quarterly in dirty environments. Semi-annual or
quarterly testing should be performed, using the appropriate Honeywell® Test Lamp, to ensure the
integrity of the detector. A complete “end-to-end” test of the entire fire detection system should be
performed periodically depending on the application.
FS24XPlus™ Material Numbers
Product Material Entries Approvals Reserved Reserved
FS24XP
A = Aluminum
S = Stainless Steel
M = M25
N = ¾’’ NPT
G = Global
X = Standard
D = Demo
X = Standard
M = Marine
FS24XP-ANGXX FS24XPlus™ -3IR - AL - 3/4 NPT kit includes mount and sunshade
FS24XP-AMGXX FS24XPlus™ - 3IR - AL - M25 kit includes mount and sunshade
FS24XP-SNGXX FS24XPlus™ - 3IR - SS - 3/4 NPT kit includesmount and sunshade
FS24XP-SMGXX FS24XPlus™ - 3IR - SS - M25 kit includes mount and sunshade
Honeywell®FS24XPlus™ | User Manual
26

Honeywell FS24X Plus Specifications

General

Brand	Honeywell
Model	FS24X Plus
Category	Measuring Instruments
Language	English