Honeywell FS24X Plus User Manual

Honeywell® FS24XPlus™ | User Manual
94
Command #193: Set Relay3 (Aux) Input Selection
Set Relay3 (Aux) Input Selection.
Request Data Bytes
Byte Format Description
0 Enum Relay3 (Aux) Input Selection
Response Data Bytes
Byte Format Description
0 Enum Relay3 (Aux) Input Selection
Command-Specific Response Codes
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3 Error Parameter Too Large
4 Error Parameter Too Small
5 Error Too few data bytes received
6 Error Transmitter Specific Command Error
7 Error Write Protect Mode
8-15 Undefined
16 Error Access Restricted
17-31 Undefined
32 Error Busy
33-127 Undefined
Command #195: Set Alarm Verification Time
Set Alarm Verification Time.
Request Data Bytes
Byte Format Description
0 Enum Alarm Verification Time
Response Data Bytes
Byte Format Description
0 Enum Alarm Verification Time

Honeywell FS24X Plus Specifications

General

Brand	Honeywell
Model	FS24X Plus
Category	Measuring Instruments
Language	English