Honeywell FS24X Plus - Command #168: Write Ma Configuration; Command #169: Configure Alarm, Warning State - Latch;Unlatch

Command #168: Write mA Configuration
Write mA Configuration.
Request Data Bytes
Byte Format Description
0 Enum State
1-4 Float Current (mA) Level
Response Data Bytes
Byte Format Description
0 Enum State
1-4 Float Current (mA) Level
Command-Specific Response Codes
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3 Error Parameter Too Large
4 Error Parameter Too Small
5 Error Too few data bytes received
6 Error Transmitter Specific Command Error
7 Error Write Protect Mode
8-15 Undefined
16 Error Access Restricted
17-31 Undefined
32 Error Busy
33-127 Undefined
Command #169: Configure Alarm, Warning State - Latch/Unlatch
Write mA Configuration.
Request Data Bytes
Byte Format Description
0 Enum State
1 Enum Latch Enable or Disable
Response Data Bytes
Byte Format Description
0 Enum
0 - Warning
1 - Alarm1
2 - Alarm2
1 Enum Latch Enable or Disable
Honeywell®FS24XPlus™ | User Manual
81