Honeywell® FS24XPlus™ | User Manual
66
Command #136: Simulate 4-20 mA
Forces Loop to State Selected.
Request Data Bytes
Byte Format Description
0 Enum Fault/Alarm,1,2/Warning/Inhibit/Normal
Response Data Bytes
Byte Format Description
0 Enum Fault/Alarm,1,2/Warning/Inhibit/Normal
Command-Specific Response Codes
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3 Error Parameter Too Large
4 Error Parameter Too Small
5 Error Too few data bytes received
6 Error Transmitter Specific Command Error
7 Error Write Protect Mode
8-15 Undefined
16 Error Access Restricted
17-31 Undefined
32 Error Busy
33-127 Undefined