Honeywell FS24X Plus - Command #190: Write Login; Command #191: Read Date Format

Honeywell® FS24XPlus™ | User Manual
92
Command #190: Write Login
Checks Login Level Password.
Request Data Bytes
Byte Format Description
0 Enum Login Level
1-8 PASSWORD Password
Response Data Bytes
Byte Format Description
0 Enum Login Level
1-8 PASSWORD Password
9 Enum Status
Command-Specific Response Codes
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3 Error Parameter Too Large
4 Error Parameter Too Small
5 Error Too few data bytes received
6 Error Transmitter Specific Command Error
7 Error Write Protect Mode
8-15 Undefined
16 Error Invalid Password
17-31 Undefined
32 Error Busy
33-127 Invalid Login Level
Command #191: Read Date Format
Reads Date Format.
Request Data Bytes
Byte Format Description
None
Response Data Bytes
Byte Format Description
0 Enum Date Format