Honeywell® FS24XPlus™ | User Manual
14
Product Overview
Honeywell® FS24XPlus™ is an advanced multi-spectrum electro-optical flame detector based on the
WideBand IR
TM
technology which responds quickly to radiant energy created by flaming fires. It is
suitable for operation in hazardous areas.
The FS24XPlus™ flame detectors are factory calibrated and robust. There is no need of a field
calibration. The sealed design with no moving parts allows for mounting in any orientation even in
harsh environments. These flame detectors are available in either 316 Stainless Steel or Painted Low
Copper Aluminum along with a choice of either two M25 or two ¾ ’’ NPT conduit entries.
These flame detectors operate under adverse weather conditions such as rain, mist, fog and in dirty
environments such as smoke. Please, note that the presence of environmental inhibitors, e.g. smoke,
rain, mist, and fog, can absorb IR radiation and reduce the sensitivity of the detector although
FS24XPlus™ is less affected than other available detection technologies.
What’s in the Box
l 1 Certified Flame Detector with stopping plug
l 1 Standard Mount (SM4) or Marine Mount (SM4-M)
l 1 Sunshade (SH-001)
l 1 FS24X Plus™ FM Performance Appendix
l 1 Certificate of Conformity
Features and Benefits
3IR sensor technology
l Superior performance in adverse weather conditions (through smoke, rain, mist and fog)
l Able to operate in harsh and corrosive environments
l Hazloc, Performance, SIL 2, and Safety approvals
l Pending marine certifications
l Built-in test diagnostics
l Robust false alarm avoidance
Ease of Installation
l Small and light weight
l Comes with mount as standard; one person mounting onto varied infrastructure
l Comes with sunshade as standard
l Simple wiring with 2 entries and pluggable connections
To Next Page
Loading...
Need help?
General
