Honeywell FS24X Plus User Manual

Command #198: Read Serial Number
Reads Serial Number.
Request Data Bytes
Byte Format Description
None
Response Data Bytes
Byte Format Description
0 ASCII Serial Number
Command-Specific Response Codes
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3 Error Parameter Too Large
4 Error Parameter Too Small
5 Error Too few data bytes received
6 Error Transmitter Specific Command Error
7 Error Write Protect Mode
8-15 Undefined
16 Error Access Restricted
17-31 Undefined
32 Error Busy
33-127 Undefined
Common-Practice Commands
Supported Commands
The Following common-practice commands are implemented:
Command Description
38 Reset "Configuration Changed" Flag
48 Read Additional Device Status
The Command #48 returns 2 bytes of data.
Supported Commands
This Field Device does not support Burst Mode, Catch Device Variable or any device-specific.
Honeywell®FS24XPlus™ | User Manual
97

Honeywell FS24X Plus Specifications

General

Brand	Honeywell
Model	FS24X Plus
Category	Measuring Instruments
Language	English