30 Series Network Video Recorder User Guide
8
Starting and Shutting Down the NVR
Starting the NVR
1. Verify that the NVR is connected to an appropriate power source.
2. For 8/16 video channels (HN300802xx/HN301602xx), turn on the power switch (See No.
10 in Figure 1-4) on the back panel to start the NVR. There’s no power switch on the back
panel for 4 video channels(HN300401xx).
Shutting Down/Reboot the NVR
To prevent damage to the hard drive, follow these steps to shut down the NVR:
1. In live view screen, click (Main Menu) on the main toolbar (see Figure 3-3 Main
Toolbar).
To Next Page
Loading...
Need help?
General
