Honeywell HN300401 Series User Manual

30 Series Network Video Recorder User Guide
50
Figure 6-30 Event Schedule
6. Click and drag the mouse to activate or de-activate alarm triggers throughout a specific
timeline.
7. Click Finish to end the configuration.
8. Repeat the process above to create more alarms according to the needs in your
surveillance deployment.
Removing an Event
Go to  Event.
1. Click and the remove button displays as .
2. Mouse over to the event you want to remove, and its entry will display the Remove
message.
3. Click the Remove message.
Setting-Event-Email
This page provides an interface where you can configure the connection to a Mail server. via
the Mail server, the system can deliver Emails containing system alarm messages to multiple
receivers. A reachable Mail server and Email accounts must be provided before you can apply
the settings.
Go to  Email.
The configuration options are identical to those found in the Email configuration in Settings -
Event window. See Email Setup on page 46.
Setting-System-Information
Go to  Information.

Honeywell HN300401 Series Specifications

General

Brand	Honeywell
Model	HN300401 Series
Category	Network Hardware
Language	English