30 Series Network Video Recorder User Guide
82
Note that multiple alarms can be triggered by one incident. See Setting-Event-Event on page
44 for how to configure the event settings.
If an event is configured with a recording action, there will be a play button to the left of
the alarm message.
Figure 7-12 Event Panel 2
Click and the event playback window will begin playback of a footage taken 10 seconds
before the occurrence of an alarm. The playback of an alarm-triggered recording will normally
last for one minute. If, however, you configured a shorter pre- and post-alarm recording time,
your alarm recording may be slightly shorter. The default for pre- and post-alarm buffer time
are 5 seconds and 20 seconds.
Figure 7-13 Event Clips
View live video: displays the live view streaming instead of the alarm
recording.
Begin the event playback.
Pause the current playback.
Mute or unmute the audio with the current playback. Drag the controller to
change the audio volume level.
To Next Page
Loading...
