Honeywell HN300401 Series - Removing a Camera; Figure 6-5 Removing a Camera; Figure 6-6 Confirm Message

Settings
33
• RTSP cameras cannot be selected as an alarm trigger.
• In Media > Stream management page, the related Video, Audio, and
stream configuration for RTSP cameras cannot be edited. The RSTP
cameras will be tagged.
Removing a Camera
Go to  ManagementAdd/edit.
1. Click and the remove button displays as .
Figure 6-5 Removing a Camera
2. Mouse over to the camera you want to remove, and its entry will display the Remove
message.
3. Click the Remove message and a confirm window prompted:
Figure 6-6 Confirm Message
4. Click Continue to remove the camera.