Management over a Web Console
75
Before Getting Started
• Before operating the NVR, make sure you have properly installed hard drives and
configured the storage volumes. Otherwise, you will not be able to operate some of the
system's functionality.
• When you log in to the Liveview or Playback interface to stream a live or recorded video,
install the ActiveX plug-ins. If it does not prompt when you log in, install plug-ins when
you try to playback a recorded video. You may then need to re-start the IE browser
console.
Note
• Chrome doesn't require plug-ins.
• Chrome only supports streaming with H.264.
Login
6. Enter the IP address of NVR in the address field of a web browser and click search, the
following screen is displayed:
Figure 7-3 Web Client Log in
7. Click Allow in the ActiveX plug-ins window at the bottom of the screen and the following
window is displayed:
To Next Page
Loading...
Need help?
General
