Honeywell INNCOM e7w User Manual

INNCOM e7w THERMOSTAT USER GUIDE
31-00302-01
52
5. Press the FC button to return to Adr and “- - “on the display.
6. Press UP/DOWN arrow buttons to select the bnd parameter
7. Press MODE button. This action displays bnd value.
8. Use the UP / DOWN arrow buttons to change the value to the Address of the PC502, Evora
or device that is the RF lock proxy.
The e7w will send the Open Bind Window command to this address in Step 9. Refer to the
below example. A PC502.4G with address 227 is the lock proxy

Honeywell INNCOM e7w Specifications

General

Brand	Honeywell
Model	INNCOM e7w
Category	Thermostat
Language	English