Honeywell INNCOM e7w

INNCOM e7w THERMOSTAT USER GUIDE
57
31-00302-01
Below is a trace capture of the e7w (13) sending the command to the HVAC Partner (14) to
execute Run Menu 10 with value 5:
7. Press the FC button to return SERVICE MODE or press UP arrow button to display next
mode
Or
Press the FC button twice to exit SERVICE MODE
Table 2: Run Parameter Value
Value Value
Change the desired Run
Parameter value to 10 using the
Up/Down buttons. Press MODE
Change value to 5 using
Up Arrow
Press FAN button to
execute