Honeywell Thor VM1 User Manual

100 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Table Stand
When the Thor VM1 is used in an office environment, it can be mounted in a table stand.
To use the table stand:
1. Attach the RAM ball to the RAM Metal Table Stand with the supplied screws and
nuts.
2. If not present, attach a RAM ball to the VMXD off-vehicle dock.
3. Slide the size D RAM arm over the ball on the table mount.
4. Insert the ball on the dock into the RAM arm and tighten the knob on the RAM arm
using the supplied RAM wrench.
5. If the Thor VM1is not already mounted to the dock, Place Thor VM1 in the Dock.

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English